2022 Hyundai Kona Air Filter in Auburn, MA

It sits in the engine bay inside a rectangular airbox just ahead of the 2.0L inline-4 intake ducting.

This airbox is designed to feed clean air to your Kona’s naturally aspirated 2.0L (engine code 4INAG2.0), protecting combustion and the mass airflow (MAF) sensor. The housing opens from the top, giving straightforward access for inspection and replacement. If you prefer professional service in Central Massachusetts, our Auburn team can inspect, replace, and reseal the housing to Hyundai specifications.

• Airbox opens by releasing clips or fasteners and lifting the cover.
• Panel-style filter sits flat; verify the gasket seats evenly on reassembly.
• We also check intake ducts for debris that can affect 147 hp performance.

It’s located behind the glove box in the HVAC housing, accessed by lowering the glove box.

The cabin microfilter removes dust and road particles from air entering the HVAC system, improving comfort during commutes around Auburn, Worcester, and nearby towns. Access requires releasing the glove box stops, then sliding out the filter tray. Our technicians can replace the filter and confirm proper airflow if you’d like to schedule service online.

• Lower glove box, release side stops, and locate the rectangular access panel.
• Slide out the filter cassette and note the airflow direction arrow.
• Install an OEM-spec filter to help minimize interior dust and odors.

The engine air filter protects the 2.0L intake for combustion, while the cabin air filter cleans air for the HVAC and passengers.

These filters serve different systems and live in separate locations, so they’re inspected and replaced independently. The engine filter helps maintain smooth throttle response and fuel economy on your front-wheel-drive Kona, while the cabin filter improves in-cabin air quality during everyday driving in Central Massachusetts. Both should be checked routinely, especially after winter and construction seasons.

• Engine filter: panel element in the under-hood airbox for the 2.0L inline-4.
• Cabin filter: microfilter behind the glove box for HVAC airflow and cleanliness.
• Different wear patterns mean replacement timing often differs.

Look for reduced power, lower fuel economy, or rough idle for the engine filter, and weak HVAC airflow or musty odors for the cabin filter.

On Auburn and Worcester routes, grit and winter road debris can load the engine filter faster, affecting response from the 147-hp 2.0L and its CVT. Inside the cabin, a dirty filter can reduce defogging performance and air volume. If symptoms appear, book a quick inspection and replacement online.

• Hesitation on acceleration or a labored intake sound suggests engine filter restriction.
• Slow windshield clearing or stale smells indicate a cabin filter issue.
• Visual checks: darkened pleats with debris and leaves are common.

Yes—engine and cabin filters are DIY-friendly, but dealer service adds OEM parts, intake/MAF checks, and verified fitment.

Many owners comfortably handle the airbox and glove box steps at home. If you’d like professional care in Auburn, our factory-trained techs install genuine Hyundai filters and confirm sealing, airflow, and housing integrity. You can also review service specials and schedule service online for a quick visit.

• Use OEM-spec filters matched to the 2.0L inline-4 (engine code 4INAG2.0).
• Inspect housing gaskets and intake boots for proper seating.
• We include a visual MAF and duct check with each replacement.

Yes—our service center installs genuine Hyundai OEM engine and cabin air filters.

Genuine parts provide the correct media, pleat density, and fit for the Kona’s intake and HVAC systems. This helps preserve designed airflow and performance during everyday driving around Auburn, Oxford, and Leicester. We’re located at 735 Southbridge Street near I-90 and I-290 for easy access; book an appointment online.

• OEM filters are engineered for the Kona’s 2.0L naturally aspirated engine.
• Cabin microfilters meet Hyundai’s HVAC airflow and filtration targets.
• Check service specials before you schedule.

No—these filters have separate functions and wear rates, so they’re inspected and replaced independently.

Central Massachusetts road grit can load the engine filter differently than the cabin filter, which depends more on HVAC use and interior conditions. During a visit, we’ll document each filter’s condition and recommend service only as needed. For convenience, you can combine both replacements in a single appointment if inspection shows they’re due.

• Separate locations: engine bay airbox vs. behind-glove-box HVAC housing.
• We replace only what inspection shows is necessary.
• Book a combined visit via our schedule service tool.

Schedule online anytime using our schedule service tool.

Our Auburn location near the Mass Pike (I-90) and I-290 makes it easy for drivers from Worcester, Millbury, Oxford, and Leicester to visit. Choose a time, note “engine/cabin air filter,” and we’ll handle the rest using OEM Hyundai parts. Check current service specials before you book.

• Address: 735 Southbridge Street, Auburn, MA.
• Add air filter inspection or replacement to any maintenance visit.
• Receive an intake and HVAC airflow check during service.

For the 2022 Hyundai Kona, our air filter service focuses on both performance and cabin comfort. We begin with an under-hood inspection of the airbox, intake booting, and a visual check of the MAF sensor area. The engine air filter is removed, evaluated for debris and restriction, then replaced with a genuine Hyundai OEM panel element if needed. Next, we lower the glove box to access the HVAC housing and slide out the cabin microfilter for inspection and, when due, OEM replacement. After installation, we confirm proper sealing, reassemble housings, and verify intake and HVAC airflow. If you prefer a single visit, you can add these services to other maintenance and review service specials before you schedule service online.

The 2022 Hyundai Kona uses a panel-style engine air filter to protect its 2.0L inline-4 (engine code 4INAG2.0) and a cabin microfilter to clean the air entering the HVAC system. Hyundai’s OEM filters feature media and pleat geometry designed for correct airflow to the non-turbocharged intake and for effective particle capture in the cabin. While replacement timing depends on inspection and driving environment, Central Massachusetts winter roads and construction dust can accelerate loading. We recommend periodic checks to protect throttle response, fuel economy, and HVAC performance. If you notice rough idle, reduced power, weak airflow, or musty odors, it’s time to inspect. Bring your 2022 Hyundai Kona to Herb Chambers Hyundai of Auburn in Auburn for OEM-spec filter service — schedule service.

Located at 735 Southbridge Street near the Mass Pike (I-90) and I-290, our dealership serves Auburn, Worcester, Millbury, Oxford, and Leicester with straightforward air filter care for the 2022 Hyundai Kona. Local winter roads can introduce salt and grit that load the engine filter, while stop-and-go commuting around Route 12 increases exposure to dust. During each visit, our factory-trained technicians install genuine Hyundai filters and confirm proper sealing, intake condition, and HVAC airflow. Use our online tools to schedule service at a convenient time and check service specials before you arrive. If you’re driving in Central Massachusetts and want predictable performance and clean cabin air, a professional inspection and timely replacement can help keep your Kona running smoothly.